EARL'S ADAPTORS
Earl's Performance stocks a host of general and special purpose adaptors, vital links in plumbing any automotive or other machinery. Nearly all are produced in blue anodised aluminium.
GENERAL PURPOSE ADAPTORS: These include:
 Pipe thread to AN adaptors: One end is AN to accept earl's Hose Ends, the other has the tapered National Pipe Thread (NPT), very commonly used on motors, gearboxes etc. They come in a range of Straight, 45 and 90 degree and Tee versions. Also some Male-Male, Male-Female and Female-Female, all NPT threads.
 AN Adaptors: The range includes Male-Male couplings and reducers, Tee pieces, and Bulkhead Adaptors, all with AN thread sizes.
AN to Metric or BSP Adaptors: With AN thread on one end and European/Japanese/late model Australian metric or British BSP threads on the other end these adaptors enable you to use Earl's Hose and Hose ends on a very wide range of vehicles.
 Plugs and Caps: With either AN or NPT threads Earl's Plugs seal off similarly threaded ports or Hose assemblies in storage. Earl's Caps seal off unused male AN' threads. For cheaper protection of stored Hoses, AN plugs and caps are available in Plastic.
SPECIAL PURPOSE ADAPTORS include:
Carburettor, Fuel Pump and Power Steering adaptors: Threads on most of these are non-standard, so these adaptors permit easy connection of Earl's Hose and Hose ends to such as Weber, Holley, Rochester etc.
 Swivel Adaptors: both Male and Female AN/AN or AN/NPT threaded in many configurations and angles these will often provide the answer to awkward or special installation problems.
 Brake Adaptors: Usually steel, in a range to permit Earl's SPEED-FLEX Hose to be used on virtually every make of Brake Caliper, Wheel Cylinder and Master Cylinder on any Car or Motorcycle.
 Weld-on Adaptors: AN threaded Male in Aluminium or Steel, AN or NPT Female in aluminium only, "weld-ons" provide the solution when you want to connect hose ends to fabricated tanks, sumps, rocker covers etc. etc.
|
Pipe thread to AN adaptors: One end is AN to accept earl's Hose Ends, the other has the tapered National Pipe Thread (NPT), very commonly used on motors, gearboxes etc. They come in a range of Straight, 45 and 90 degree and Tee versions. Also some Male-Male, Male-Female and Female-Female, all NPT threads.
